Call (build API)

```
public interface Call
```
This object represents a call issued or received by the Core.

Linphone only allows at most one active call at any given time and it will be
in Call.State.StreamsRunning. However, if the core is locally hosting a
Conference, you may have some or all the calls in the conference in
Call.State.StreamsRunning as well as an additional active call outside of
the conference in Call.State.StreamsRunning if the local participant of the
Conference is not part of it.
You can get the Call.State of the call using getState(), it's current
CallParams with getCurrentParams() and the latest statistics by
calling getAudioStats() or getVideoStats().

Nested Class Summary

Nested Classes
Modifier and Type Interface Description

static class Call.Dir

static class Call.State

static class Call.Status

Nested Classes
Modifier and Type	Interface	Description
`static class`	`Call.Dir`
`static class`	`Call.State`
`static class`	`Call.Status`

Method Summary

All Methods Instance Methods Abstract Methods Deprecated Methods
Modifier and Type	Method	Description
`int`	`accept()`	Accept an incoming call.
`int`	`acceptEarlyMedia()`	Accept an early media session for an incoming call.
`int`	`acceptEarlyMediaWithParams(CallParams params)`	When receiving an incoming, accept to start a media session as early-media.
`int`	`acceptUpdate(CallParams params)`	Accept call modifications initiated by other end.
`int`	`acceptWithParams(CallParams params)`	Accept an incoming call, with parameters.
`void`	`addListener(CallListener listener)`
`boolean`	`askedToAutoanswer()`	Tell whether a call has been asked to autoanswer.
`void`	`cancelDtmfs()`	Stop current DTMF sequence sending.
`void`	`confirmGoClear()`	Method to be called after the user confirm that he/she is notifed of the on going Go Clear procedure.
`java.lang.Object`	`createNativeVideoWindowId()`	Create a native video window id where the video is to be displayed.
`int`	`decline(Reason reason)`	Decline a pending incoming call, with a reason.
`int`	`declineWithErrorInfo(ErrorInfo ei)`	Decline a pending incoming call, with a `ErrorInfo` object.
`int`	`deferUpdate()`	When receiving a #LinphoneCallUpdatedByRemote state notification, prevent `Core` from performing an automatic answer.
`CallStats`	`getAudioStats()`	Returns a copy of the call statistics for the audio stream.
`java.lang.String`	`getAuthenticationToken()`	Returns the ZRTP authentication token to verify.
`boolean`	`getAuthenticationTokenVerified()`	Returns whether ZRTP authentication token is verified.
`float`	`getAverageQuality()`	Returns call quality averaged over all the duration of the call.
`CallLog`	`getCallLog()`	Gets the call log associated to this call.
`ChatRoom`	`getChatRoom()`	Create a new chat room for real time messaging from a call if not already existing, else return existing one.
`Conference`	`getConference()`	Return the associated conference object.
`Core`	`getCore()`	Get the core that has created the specified call.
`CallParams`	`getCurrentParams()`	Returns current parameters associated to the call.
`float`	`getCurrentQuality()`	Obtain real-time quality rating of the call.
`Call.Dir`	`getDir()`	Returns direction of the call (incoming or outgoing).
`Address`	`getDiversionAddress()`	Returns the diversion address associated to this call.
`int`	`getDuration()`	Returns call's duration in seconds.
`ErrorInfo`	`getErrorInfo()`	Returns full details about call errors or termination reasons.
`AudioDevice`	`getInputAudioDevice()`	Gets the current input device for this call.
`boolean`	`getMicrophoneMuted()`	Get microphone muted state.
`float`	`getMicrophoneVolumeGain()`	Get microphone volume gain.
`long`	`getNativePointer()`	Gets the native pointer used by this class to make native method calls.
`java.lang.Object`	`getNativeVideoWindowId()`	Get the native window handle of the video window, casted as an unsigned long.
`AudioDevice`	`getOutputAudioDevice()`	Gets the current output device for this call.
`CallParams`	`getParams()`	Returns local parameters associated with the call.
`Player`	`getPlayer()`	Gets a player associated with the call to play a local file and stream it to the remote peer.
`float`	`getPlayVolume()`	Get the mesured playback volume level (received from remote) in dbm0.
`Reason`	`getReason()`	Returns the reason for a call termination (either error or normal termination)
`float`	`getRecordVolume()`	Get the mesured record volume level (sent to remote) in dbm0.
`java.lang.String`	`getReferTo()`	Gets the refer-to uri (if the call was transfered).
`Address`	`getRemoteAddress()`	Returns the remote address associated to this call.
`java.lang.String`	`getRemoteAddressAsString()`	Deprecated. 06/07/2020 use `getRemoteAddress()` instead.
`java.lang.String`	`getRemoteContact()`	Returns the far end's sip contact as a string, if available.
`CallParams`	`getRemoteParams()`	Returns call parameters proposed by remote.
`java.lang.String`	`getRemoteUserAgent()`	Returns the far end's user agent description string, if available.
`Call`	`getReplacedCall()`	Returns the call object this call is replacing, if any.
`Address`	`getRequestAddress()`	The address to which the call has been sent, taken directly from the SIP URI of the INVITE.
`boolean`	`getSpeakerMuted()`	Get speaker muted state.
`float`	`getSpeakerVolumeGain()`	Get speaker volume gain.
`Call.State`	`getState()`	Retrieves the call's current state.
`CallStats`	`getStats(StreamType type)`	Returns a copy of the call statistics for a particular stream type.
`int`	`getStreamCount()`	Returns the number of stream for the given call.
`CallStats`	`getTextStats()`	Returns a copy of the call statistics for the text stream.
`Address`	`getToAddress()`	Returns the to address with its headers associated to this call.
`java.lang.String`	`getToHeader(java.lang.String headerName)`	Deprecated. 27/10/2020. Use `CallParams.getCustomHeader(java.lang.String)` on `getRemoteParams()` instead.
`Call`	`getTransfererCall()`	Gets the transferer if this call was started automatically as a result of an incoming transfer request.
`Call.State`	`getTransferState()`	Returns the current transfer state, if a transfer has been initiated from this call.
`Call`	`getTransferTargetCall()`	When this call has received a transfer request, returns the new call that was automatically created as a result of the transfer.
`java.lang.Object`	`getUserData()`	Gets the object stored in this object user's data
`VideoSourceDescriptor`	`getVideoSource()`	Gets the video source of a call.
`CallStats`	`getVideoStats()`	Returns a copy of the call statistics for the video stream.
`boolean`	`hasTransferPending()`	Returns if this calls has received a transfer that has not been executed yet.
`boolean`	`isCameraEnabled()`	Returns if camera pictures are allowed to be sent to the remote party.
`boolean`	`isEchoCancellationEnabled()`	Returns if echo cancellation is enabled.
`boolean`	`isEchoLimiterEnabled()`	Returns if echo limiter is enabled.
`boolean`	`isRecording()`	Deprecated. 15/09/2021 Use `CallParams.isRecording()` instead.
`boolean`	`mediaInProgress()`	Indicates whether an operation is in progress at the media side.
`void`	`notifyRinging()`	Starts the process of replying 180 Ringing.
`void`	`oglRender()`	Calls generic OpenGL render for a given call.
`int`	`pause()`	Pauses the call.
`int`	`redirect(java.lang.String redirectUri)`	Deprecated. 27/10/2020. Use `redirectTo(org.linphone.core.Address)` instead.
`int`	`redirectTo(Address redirectAddress)`	Redirect the specified call to the given redirect Address.
`void`	`removeListener(CallListener listener)`
`void`	`requestNotifyNextVideoFrameDecoded()`	Request the callback passed to linphone_call_cbs_set_next_video_frame_decoded to be called the next time the video decoder properly decodes a video frame.
`int`	`resume()`	Resumes a call.
`int`	`sendDtmf(char dtmf)`	Send the specified dtmf.
`int`	`sendDtmfs(java.lang.String dtmfs)`	Send a list of dtmf.
`int`	`sendInfoMessage(InfoMessage info)`	Sends an info message through an established call.
`void`	`sendVfuRequest()`	Request remote side to send us a Video Fast Update.
`void`	`setAuthenticationTokenVerified(boolean verified)`	Set the result of ZRTP short code verification by user.
`void`	`setCameraEnabled(boolean enabled)`	Indicate whether camera input should be sent to remote end.
`void`	`setEchoCancellationEnabled(boolean enable)`	Enables or disable echo cancellation for this call.
`void`	`setEchoLimiterEnabled(boolean enable)`	Enables or disable echo limiter for this call.
`void`	`setInputAudioDevice(AudioDevice audioDevice)`	Sets the given `AudioDevice` as input for this call only.
`void`	`setMicrophoneMuted(boolean muted)`	Set microphone muted state.
`void`	`setMicrophoneVolumeGain(float volume)`	Set microphone volume gain.
`void`	`setNativeVideoWindowId(java.lang.Object windowId)`	Set the native video window id where the video is to be displayed.
`void`	`setOutputAudioDevice(AudioDevice audioDevice)`	Sets the given `AudioDevice` as output for this call only.
`void`	`setParams(CallParams params)`	Set call parameters - advanced and not recommended feature - use with caution.
`void`	`setSpeakerMuted(boolean muted)`	Set speaker muted state.
`void`	`setSpeakerVolumeGain(float volume)`	Set speaker volume gain.
`void`	`setUserData(java.lang.Object data)`	Sets the object to store in this object user's data
`void`	`setVideoSource(VideoSourceDescriptor descriptor)`	Sets the video source of a call.
`void`	`startRecording()`	Starts call recording.
`void`	`stopRecording()`	Stops call recording.
`int`	`takePreviewSnapshot(java.lang.String filePath)`	Take a photo of currently captured video and write it into a jpeg file.
`int`	`takeVideoSnapshot(java.lang.String filePath)`	Take a photo of currently received video and write it into a jpeg file.
`int`	`terminate()`	Terminates a call.
`int`	`terminateWithErrorInfo(ErrorInfo ei)`	Terminates a call.
`java.lang.String`	`toString()`
`int`	`transfer(java.lang.String referTo)`	Deprecated. 27/10/2020. Use `transferTo(org.linphone.core.Address)` instead.
`int`	`transferTo(Address referTo)`	Performs a simple call transfer to the specified destination.
`int`	`transferToAnother(Call dest)`	Transfers a call to destination of another running call.
`int`	`update(CallParams params)`	Updates a running call according to supplied call parameters or parameters changed in the LinphoneCore.
`void`	`zoom(float zoomFactor, float cx, float cy)`	Perform a zoom of the video displayed during a call.

- Method Detail
  - getAudioStats
```
@Nullable
CallStats getAudioStats()
```
    Returns a copy of the call statistics for the audio stream.
    
    Returns:
    
    a CallStats object for the audio stream or null if it isn't
    available.
  - getAuthenticationToken
```
@Nullable
java.lang.String getAuthenticationToken()
```
    Returns the ZRTP authentication token to verify.
    
    Returns:
    
    the authentication token to verify or null if ZRTP isn't enabled.
  - getAuthenticationTokenVerified
```
boolean getAuthenticationTokenVerified()
```
    Returns whether ZRTP authentication token is verified.
    
    If not, it must be verified by users as described in ZRTP procedure. Once done,
    the application must inform of the results with setAuthenticationTokenVerified(boolean)
    .
    
    Returns:
    
    true if authentication token is verifed, false otherwise.
  - setAuthenticationTokenVerified
```
void setAuthenticationTokenVerified(boolean verified)
```
    Set the result of ZRTP short code verification by user.
    
    If remote party also does the same, it will update the ZRTP cache so that
    user's verification will not be required for the two users.
    
    Parameters:
    
    verified - whether the ZRTP SAS is verified.
  - getAverageQuality
```
float getAverageQuality()
```
    Returns call quality averaged over all the duration of the call.
    
    See getCurrentQuality() for more details about quality measurement.
    
    Returns:
    
    the call average quality since tbe beginning of the call.
  - getCallLog
```
@NonNull
CallLog getCallLog()
```
    Gets the call log associated to this call.
    
    Returns:
    
    The CallLog associated with the specified Call.
  - isCameraEnabled
```
boolean isCameraEnabled()
```
    Returns if camera pictures are allowed to be sent to the remote party.
    
    Returns:
    
    true if local video stream is being sent, false otherwise.
  - setCameraEnabled
```
void setCameraEnabled(boolean enabled)
```
    Indicate whether camera input should be sent to remote end.
    
    Parameters:
    
    enabled - wether or not to send local video stream.
  - getChatRoom
```
@Nullable
ChatRoom getChatRoom()
```
    Create a new chat room for real time messaging from a call if not already
    existing, else return existing one.
    
    No reference is given to the caller: the chat room will be deleted when the
    call is ended.
    
    Returns:
    
    ChatRoom where real time messaging can take place or null if
    chat room couldn't be created.
  - getConference
```
@Nullable
Conference getConference()
```
    Return the associated conference object.
    
    Returns:
    
    A pointer on Conference or null if the call is not part of any
    conference.
  - getCore
```
@NonNull
Core getCore()
```
    Get the core that has created the specified call.
    
    Returns:
    
    The Core object that has created the specified call.
  - getCurrentParams
```
@NonNull
CallParams getCurrentParams()
```
    Returns current parameters associated to the call.
    
    Returns:
    
    the current CallParams of this call.
  - getCurrentQuality
```
float getCurrentQuality()
```
    Obtain real-time quality rating of the call.
    
    Based on local RTP statistics and RTCP feedback, a quality rating is computed
    and updated during all the duration of the call. This function returns its
    value at the time of the function call. It is expected that the rating is
    updated at least every 5 seconds or so. The rating is a floating point number
    comprised between 0 and 5.
    4-5 = good quality 3-4 = average quality 2-3 = poor quality 1-2 = very poor
    quality 0-1 = can't be worse, mostly unusable
    
    Returns:
    
    The function returns -1 if no quality measurement is available, for
    example if no active audio stream exist. Otherwise it returns the quality
    rating.
  - getDir
```
Call.Dir getDir()
```
    Returns direction of the call (incoming or outgoing).
    
    Returns:
    
    the Call.Dir
  - getDiversionAddress
```
@Nullable
Address getDiversionAddress()
```
    Returns the diversion address associated to this call.
    
    Returns:
    
    the diversion address as Address or null.
  - getDuration
```
int getDuration()
```
    Returns call's duration in seconds.
    
    Returns:
    
    the call's duration in seconds.
  - isEchoCancellationEnabled
```
boolean isEchoCancellationEnabled()
```
    Returns if echo cancellation is enabled.
    
    Returns:
    
    true if echo cancellation is enabled, false otherwise.
  - setEchoCancellationEnabled
```
void setEchoCancellationEnabled(boolean enable)
```
    Enables or disable echo cancellation for this call.
    
    Parameters:
    
    enable - wether to enable echo cancellation or not.
  - isEchoLimiterEnabled
```
boolean isEchoLimiterEnabled()
```
    Returns if echo limiter is enabled.
    
    Returns:
    
    true if echo limiter is enabled, false otherwise.
  - setEchoLimiterEnabled
```
void setEchoLimiterEnabled(boolean enable)
```
    Enables or disable echo limiter for this call.
    
    Parameters:
    
    enable - wether to enable echo limiter or not.
  - getErrorInfo
```
@NonNull
ErrorInfo getErrorInfo()
```
    Returns full details about call errors or termination reasons.
    
    Returns:
    
    ErrorInfo object holding the reason error.
  - getInputAudioDevice
```
@Nullable
AudioDevice getInputAudioDevice()
```
    Gets the current input device for this call.
    
    Returns:
    
    the AudioDevice used by this call as input or null if there is
    currently no soundcard configured (depending on the state of the call)
  - setInputAudioDevice
```
void setInputAudioDevice(@Nullable
                         AudioDevice audioDevice)
```
    Sets the given AudioDevice as input for this call only.
    
    Parameters:
    
    audioDevice - The AudioDevice. null does nothing.
  - isRecording
```
@Deprecated
boolean isRecording()
```
    Deprecated. 15/09/2021 Use CallParams.isRecording() instead.
    
    Returns whether or not the call is currently being recorded.
    
    Returns:
    
    true if recording is in progress, false otherwise
  - getMicrophoneMuted
```
boolean getMicrophoneMuted()
```
    Get microphone muted state.
    
    Note that the microphone may be disabled globally if false was given to Core#enableMic
    .
    
    Returns:
    
    The microphone muted state.
  - setMicrophoneMuted
```
void setMicrophoneMuted(boolean muted)
```
    Set microphone muted state.
    
    The boolean value given is applied logical-and with the value given to Core#enableMic
    .
    
    Parameters:
    
    muted - The microphone muted state.
  - getMicrophoneVolumeGain
```
float getMicrophoneVolumeGain()
```
    Get microphone volume gain.
    
    If the sound backend supports it, the returned gain is equal to the gain set
    with the system mixer.
    
    Returns:
    
    double Percentage of the max supported volume gain. Valid values are in
    [ 0.0 : 1.0 ]. In case of failure, a negative value is returned
  - setMicrophoneVolumeGain
```
void setMicrophoneVolumeGain(float volume)
```
    Set microphone volume gain.
    
    If the sound backend supports it, the new gain will synchronized with the
    system mixer.
    
    Parameters:
    
    volume - Percentage of the max supported gain. Valid values are in [ 0.0 :
    1.0 ].
  - getNativeVideoWindowId
```
@Nullable
java.lang.Object getNativeVideoWindowId()
```
    Get the native window handle of the video window, casted as an unsigned long.
    
    Returns:
    
    the native video window id (type may vary depending on platform).
  - setNativeVideoWindowId
```
void setNativeVideoWindowId(@Nullable
                            java.lang.Object windowId)
```
    Set the native video window id where the video is to be displayed.
    
    For MacOS, Linux, Windows: if not set or 0 a window will be automatically
    created, unless the special id -1 is given.
    
    Parameters:
    
    windowId - the native video window id.
  - getOutputAudioDevice
```
@Nullable
AudioDevice getOutputAudioDevice()
```
    Gets the current output device for this call.
    
    Returns:
    
    the AudioDevice used by this call as output or null if there is
    currently no soundcard configured (depending on the state of the call)
  - setOutputAudioDevice
```
void setOutputAudioDevice(@Nullable
                          AudioDevice audioDevice)
```
    Sets the given AudioDevice as output for this call only.
    
    Parameters:
    
    audioDevice - The AudioDevice. null does nothing.
  - getParams
```
@NonNull
CallParams getParams()
```
    Returns local parameters associated with the call.
    
    This is typically the parameters passed at call initiation to Core.inviteAddressWithParams(org.linphone.core.Address, org.linphone.core.CallParams)
    or acceptWithParams(org.linphone.core.CallParams), or some default parameters if no CallParams
    was explicitely passed during call initiation.
    
    Returns:
    
    the call's local parameters.
  - setParams
```
void setParams(@NonNull
               CallParams params)
```
    Set call parameters - advanced and not recommended feature - use with caution.
    
    Local call parameters applicable to an outgoing or incoming shall usually be
    passed to Core.inviteAddressWithParams(org.linphone.core.Address, org.linphone.core.CallParams) or acceptWithParams(org.linphone.core.CallParams).
    However, in some cases it might be desirable from a software design standpoint
    to modify local parameters outside of the application layer, typically in the
    purpose of implementing a custom logic including special headers in INVITE or
    200Ok requests, driven by a call_state_changed listener method. This function
    accepts to assign a new CallParams only in #LinphoneCallOutgoingInit
    and #LinphoneCallIncomingReceived states.
    
    Parameters:
    
    params - the CallParams object
  - getPlayVolume
```
float getPlayVolume()
```
    Get the mesured playback volume level (received from remote) in dbm0.
    
    Returns:
    
    float Volume level in percentage.
  - getPlayer
```
@NonNull
Player getPlayer()
```
    Gets a player associated with the call to play a local file and stream it to
    the remote peer.
    
    Returns:
    
    A Player object
  - getReason
```
Reason getReason()
```
    Returns the reason for a call termination (either error or normal termination)
    
    Returns:
    
    the Reason of the call termination.
  - getRecordVolume
```
float getRecordVolume()
```
    Get the mesured record volume level (sent to remote) in dbm0.
    
    Returns:
    
    float Volume level in percentage.
  - getReferTo
```
@Nullable
java.lang.String getReferTo()
```
    Gets the refer-to uri (if the call was transfered).
    
    Returns:
    
    The refer-to uri of the call (if it was transfered).
  - getRemoteAddress
```
@NonNull
Address getRemoteAddress()
```
    Returns the remote address associated to this call.
    
    Returns:
    
    The Address of the remote end of the call.
  - getRemoteAddressAsString
```
@Deprecated
@Nullable
java.lang.String getRemoteAddressAsString()
```
    Deprecated. 06/07/2020 use getRemoteAddress() instead.
    
    Returns the remote address associated to this call as a string.
    
    The result string must be freed by user using ms_free().
    
    Returns:
    
    the remote address as a string.
  - getRemoteContact
```
@Nullable
java.lang.String getRemoteContact()
```
    Returns the far end's sip contact as a string, if available.
    
    Returns:
    
    the remote contact or null.
  - getRemoteParams
```
@Nullable
CallParams getRemoteParams()
```
    Returns call parameters proposed by remote.
    
    This is useful when receiving an incoming call, to know whether the remote
    party supports video, encryption or whatever.
    
    Returns:
    
    the CallParams suggested by the remote or null.
  - getRemoteUserAgent
```
@Nullable
java.lang.String getRemoteUserAgent()
```
    Returns the far end's user agent description string, if available.
    
    Returns:
    
    the remote user agent or null.
  - getReplacedCall
```
@Nullable
Call getReplacedCall()
```
    Returns the call object this call is replacing, if any.
    
    Call replacement can occur during call transfers. By default, the core
    automatically terminates the replaced call and accept the new one. This
    function allows the application to know whether a new incoming call is a one
    that replaces another one.
    
    Returns:
    
    the Call object this call is replacing or null.
  - getRequestAddress
```
@NonNull
Address getRequestAddress()
```
    The address to which the call has been sent, taken directly from the SIP URI of
    the INVITE.
    
    Usually equal to the To field, except when e.g. using a fallback contact
    address. You should probably use getToAddress() instead, unless you know what
    you're doing.
    
    Returns:
    
    the Address matching the URI of the INVITE request.
  - getSpeakerMuted
```
boolean getSpeakerMuted()
```
    Get speaker muted state.
    
    Returns:
    
    The speaker muted state.
  - setSpeakerMuted
```
void setSpeakerMuted(boolean muted)
```
    Set speaker muted state.
    
    Parameters:
    
    muted - The speaker muted state.
  - getSpeakerVolumeGain
```
float getSpeakerVolumeGain()
```
    Get speaker volume gain.
    
    If the sound backend supports it, the returned gain is equal to the gain set
    with the system mixer.
    
    Returns:
    
    Percentage of the max supported volume gain. Valid values are in [ 0.0
    : 1.0 ]. In case of failure, a negative value is returned
  - setSpeakerVolumeGain
```
void setSpeakerVolumeGain(float volume)
```
    Set speaker volume gain.
    
    If the sound backend supports it, the new gain will synchronized with the
    system mixer.
    
    Parameters:
    
    volume - Percentage of the max supported gain. Valid values are in [ 0.0 :
    1.0 ].
  - getState
```
Call.State getState()
```
    Retrieves the call's current state.
    
    Returns:
    
    the current Call.State of this call.
  - getStreamCount
```
int getStreamCount()
```
    Returns the number of stream for the given call.
    
    Returns:
    
    the amount of streams for this call.
  - getTextStats
```
@Nullable
CallStats getTextStats()
```
    Returns a copy of the call statistics for the text stream.
    
    Returns:
    
    a CallStats object for the text stream or null if it isn't
    available.
  - getToAddress
```
@NonNull
Address getToAddress()
```
    Returns the to address with its headers associated to this call.
    
    Returns:
    
    the Address matching the TO of the call.
  - getTransferState
```
Call.State getTransferState()
```
    Returns the current transfer state, if a transfer has been initiated from this
    call.
    
    see: linphone_core_transfer_call , linphone_core_transfer_call_to_another
    
    Returns:
    
    the Call.State.
  - getTransferTargetCall
```
@Nullable
Call getTransferTargetCall()
```
    When this call has received a transfer request, returns the new call that was
    automatically created as a result of the transfer.
    
    Returns:
    
    the transfer Call created.
  - getTransfererCall
```
@Nullable
Call getTransfererCall()
```
    Gets the transferer if this call was started automatically as a result of an
    incoming transfer request.
    
    The call in which the transfer request was received is returned in this case.
    
    Returns:
    
    The transferer Call if the specified call was started
    automatically as a result of an incoming transfer request, null otherwise.
  - getVideoSource
```
@Nullable
VideoSourceDescriptor getVideoSource()
```
    Gets the video source of a call.
    
    Returns:
    
    The VideoSourceDescriptor describing the video source that is
    set
  - setVideoSource
```
void setVideoSource(@Nullable
                    VideoSourceDescriptor descriptor)
```
    Sets the video source of a call.
    
    Parameters:
    
    descriptor - The VideoSourceDescriptor describing the video source
    to set
  - getVideoStats
```
@Nullable
CallStats getVideoStats()
```
    Returns a copy of the call statistics for the video stream.
    
    Returns:
    
    a CallStats object for the video stream or null if it isn't
    available.
  - accept
```
int accept()
```
    Accept an incoming call.
    
    Basically the application is notified of incoming calls within the
    call_state_changed callback of the LinphoneCoreVTable structure, where it will
    receive a Call.Dir.Incoming event with the associated Call object.
    The application can later accept the call using this method.
    
    Returns:
    
    0 on success, -1 on failure
  - acceptEarlyMedia
```
int acceptEarlyMedia()
```
    Accept an early media session for an incoming call.
    
    This is identical as calling acceptEarlyMediaWithParams(org.linphone.core.CallParams) with null
    parameters.
    
    Returns:
    
    0 if successful, -1 otherwise
    see: acceptEarlyMediaWithParams(org.linphone.core.CallParams)
  - acceptEarlyMediaWithParams
```
int acceptEarlyMediaWithParams(@Nullable
                               CallParams params)
```
    When receiving an incoming, accept to start a media session as early-media.
    
    This means the call is not accepted but audio & video streams can be
    established if the remote party supports early media. However, unlike after
    call acceptance, mic and camera input are not sent during early-media, though
    received audio & video are played normally. The call can then later be fully
    accepted using accept() or acceptWithParams(org.linphone.core.CallParams).
    
    Parameters:
    
    params - The call parameters to use (can be null).
    
    Returns:
    
    0 if successful, -1 otherwise
  - acceptUpdate
```
int acceptUpdate(@Nullable
                 CallParams params)
```
    Accept call modifications initiated by other end.
    
    This call may be performed in response to a #LinphoneCallUpdatedByRemote state
    notification. When such notification arrives, the application can decide to
    call deferUpdate() so that it can have the time to prompt the user.
    getRemoteParams() can be used to get information about the call
    parameters requested by the other party, such as whether a video stream is
    requested.
    When the user accepts or refuse the change, acceptUpdate(org.linphone.core.CallParams) can be done
    to answer to the other party. If params is null, then the same call parameters
    established before the update request will continue to be used (no change). If
    params is not null, then the update will be accepted according to the
    parameters passed. Typical example is when a user accepts to start video, then
    params should indicate that video stream should be used (see CallParams#enableVideo
    ).
    
    Parameters:
    
    params - A CallParams object describing the call parameters to
    accept.
    
    Returns:
    
    0 if successful, -1 otherwise (actually when this function call is
    performed outside ot #LinphoneCallUpdatedByRemote state)
  - acceptWithParams
```
int acceptWithParams(@Nullable
                     CallParams params)
```
    Accept an incoming call, with parameters.
    
    Basically the application is notified of incoming calls within the
    call_state_changed callback of the LinphoneCoreVTable structure, where it will
    receive a Call.Dir.Incoming event with the associated Call object.
    The application can later accept the call using this method.
    
    Parameters:
    
    params - The specific parameters for this call, for example whether video
    is accepted or not. Use null to use default parameters.
    
    Returns:
    
    0 on success, -1 on failure
  - askedToAutoanswer
```
boolean askedToAutoanswer()
```
    Tell whether a call has been asked to autoanswer.
    
    Returns:
    
    A boolean value telling whether the call has been asked to autoanswer
  - cancelDtmfs
```
void cancelDtmfs()
```
    Stop current DTMF sequence sending.
    
    Please note that some DTMF could be already sent, depending on when this
    function call is delayed from sendDtmfs(java.lang.String). This function will be
    automatically called if call state change to anything but
    LinphoneCallStreamsRunning.
  - confirmGoClear
```
void confirmGoClear()
```
    Method to be called after the user confirm that he/she is notifed of the on
    going Go Clear procedure.
    
    warning: this operation must be imperatevely initiate by a user action on
    sending of the GoClear ACK
  - createNativeVideoWindowId
```
@Nullable
java.lang.Object createNativeVideoWindowId()
```
    Create a native video window id where the video is to be displayed.
    
    Returns:
    
    the native video window id (type may vary depending on platform).
  - decline
```
int decline(Reason reason)
```
    Decline a pending incoming call, with a reason.
    
    Parameters:
    
    reason - The reason for rejecting the call: Reason.Declined or
    Reason.Busy
    
    Returns:
    
    0 on success, -1 on failure
  - declineWithErrorInfo
```
int declineWithErrorInfo(@Nullable
                         ErrorInfo ei)
```
    Decline a pending incoming call, with a ErrorInfo object.
    
    Parameters:
    
    ei - ErrorInfo containing more information on the call rejection.
    
    Returns:
    
    0 on success, -1 on failure
  - deferUpdate
```
int deferUpdate()
```
    When receiving a #LinphoneCallUpdatedByRemote state notification, prevent
    Core from performing an automatic answer.
    
    When receiving a #LinphoneCallUpdatedByRemote state notification (ie an
    incoming reINVITE), the default behaviour of Core is defined by the
    "defer_update_default" option of the "sip" section of the config. If this
    option is 0 (the default) then the Core automatically answers the
    reINIVTE with call parameters unchanged. However when for example when the
    remote party updated the call to propose a video stream, it can be useful to
    prompt the user before answering. This can be achieved by calling
    linphone_core_defer_call_update during the call state notification, to
    deactivate the automatic answer that would just confirm the audio but reject
    the video. Then, when the user responds to dialog prompt, it becomes possible
    to call acceptUpdate(org.linphone.core.CallParams) to answer the reINVITE, with eventually video
    enabled in the CallParams argument.
    The #LinphoneCallUpdatedByRemote notification can also arrive when receiving an
    INVITE without SDP. In such case, an unchanged offer is made in the 200Ok, and
    when the ACK containing the SDP answer is received,
    #LinphoneCallUpdatedByRemote is triggered to notify the application of possible
    changes in the media session. However in such case defering the update has no
    meaning since we just generating an offer.
    
    Returns:
    
    0 if successful, -1 if the deferUpdate() was done outside a
    valid #LinphoneCallUpdatedByRemote notification
  - getStats
```
@Nullable
CallStats getStats(StreamType type)
```
    Returns a copy of the call statistics for a particular stream type.
    
    Parameters:
    
    type - the StreamType
    
    Returns:
    
    a CallStats object for the given stream or null if stream isn't
    available.
  - getToHeader
```
@Deprecated
@Nullable
java.lang.String getToHeader(@NonNull
                             java.lang.String headerName)
```
    Deprecated. 27/10/2020. Use CallParams.getCustomHeader(java.lang.String) on getRemoteParams()
    instead.
    
    Returns the value of the header name.
    
    Parameters:
    
    headerName - the name of the header to check.
    
    Returns:
    
    the value of the header if exists.
  - hasTransferPending
```
boolean hasTransferPending()
```
    Returns if this calls has received a transfer that has not been executed yet.
    
    Pending transfers are executed when this call is being paused or closed,
    locally or by remote endpoint. If the call is already paused while receiving
    the transfer request, the transfer immediately occurs.
    
    Returns:
    
    true if transfer is pending, false otherwise.
  - mediaInProgress
```
boolean mediaInProgress()
```
    Indicates whether an operation is in progress at the media side.
    
    It can be a bad idea to initiate signaling operations (adding video, pausing
    the call, removing video, changing video parameters) while the media is busy in
    establishing the connection (typically ICE connectivity checks). It can result
    in failures generating loss of time in future operations in the call.
    Applications are invited to check this function after each call state change to
    decide whether certain operations are permitted or not.
    
    Returns:
    
    true if media is busy in establishing the connection, false otherwise.
  - notifyRinging
```
void notifyRinging()
```
    Starts the process of replying 180 Ringing.
    
    This function is used in conjonction with Core#enableAutoSendRinging.
    If the automatic sending of the 180 Ringing is disabled, this function needs to
    be called manually before the call timeouts.
  - oglRender
```
void oglRender()
```
    Calls generic OpenGL render for a given call.
  - pause
```
int pause()
```
    Pauses the call.
    
    If a music file has been setup using Core.setPlayFile(java.lang.String), this file will
    be played to the remote user. The only way to resume a paused call is to call
    resume().
    
    Returns:
    
    0 on success, -1 on failure
    see: resume()
  - redirect
```
@Deprecated
int redirect(@NonNull
             java.lang.String redirectUri)
```
    Deprecated. 27/10/2020. Use redirectTo(org.linphone.core.Address) instead.
    
    Redirect the specified call to the given redirect URI.
    
    Parameters:
    
    redirectUri - The URI to redirect the call to
    
    Returns:
    
    0 if successful, -1 on error.
  - redirectTo
```
int redirectTo(@NonNull
               Address redirectAddress)
```
    Redirect the specified call to the given redirect Address.
    
    Parameters:
    
    redirectAddress - The Address to redirect the call to
    
    Returns:
    
    0 if successful, -1 on error.
  - requestNotifyNextVideoFrameDecoded
```
void requestNotifyNextVideoFrameDecoded()
```
    Request the callback passed to linphone_call_cbs_set_next_video_frame_decoded
    to be called the next time the video decoder properly decodes a video frame.
  - resume
```
int resume()
```
    Resumes a call.
    
    The call needs to have been paused previously with pause().
    
    Returns:
    
    0 on success, -1 on failure
    see: pause()
  - sendDtmf
```
int sendDtmf(char dtmf)
```
    Send the specified dtmf.
    
    The dtmf is automatically played to the user.
    
    Parameters:
    
    dtmf - The dtmf name specified as a char, such as '0', '#' etc...
    
    Returns:
    
    0 if successful, -1 on error.
  - sendDtmfs
```
int sendDtmfs(@NonNull
              java.lang.String dtmfs)
```
    Send a list of dtmf.
    
    The dtmfs are automatically sent to remote, separated by some needed
    customizable delay. Sending is canceled if the call state changes to something
    not LinphoneCallStreamsRunning.
    
    Parameters:
    
    dtmfs - A dtmf sequence such as '123#123123'
    
    Returns:
    
    -2 if there is already a DTMF sequence, -1 if call is not ready, 0
    otherwise.
  - sendInfoMessage
```
int sendInfoMessage(@NonNull
                    InfoMessage info)
```
    Sends an info message through an established call.
    
    Parameters:
    
    info - the InfoMessage to send
  - sendVfuRequest
```
void sendVfuRequest()
```
    Request remote side to send us a Video Fast Update.
  - startRecording
```
void startRecording()
```
    Starts call recording.
    
    Video record is only available if this function is called in state
    StreamRunning. The output file where audio is recorded must be previously
    specified with CallParams.setRecordFile(java.lang.String).
  - stopRecording
```
void stopRecording()
```
    Stops call recording.
  - takePreviewSnapshot
```
int takePreviewSnapshot(@NonNull
                        java.lang.String filePath)
```
    Take a photo of currently captured video and write it into a jpeg file.
    
    Note that the snapshot is asynchronous, an application shall not assume that
    the file is created when the function returns.
    
    Parameters:
    
    filePath - a path where to write the jpeg content.
    
    Returns:
    
    0 if successful, -1 otherwise (typically if jpeg format is not
    supported).
  - takeVideoSnapshot
```
int takeVideoSnapshot(@NonNull
                      java.lang.String filePath)
```
    Take a photo of currently received video and write it into a jpeg file.
    
    Note that the snapshot is asynchronous, an application shall not assume that
    the file is created when the function returns.
    
    Parameters:
    
    filePath - a path where to write the jpeg content.
    
    Returns:
    
    0 if successful, -1 otherwise (typically if jpeg format is not
    supported).
  - terminate
```
int terminate()
```
    Terminates a call.
    
    Returns:
    
    0 on success, -1 on failure
  - terminateWithErrorInfo
```
int terminateWithErrorInfo(@Nullable
                           ErrorInfo ei)
```
    Terminates a call.
    
    Parameters:
    
    ei - ErrorInfo
    
    Returns:
    
    0 on success, -1 on failure
  - transfer
```
@Deprecated
int transfer(@NonNull
             java.lang.String referTo)
```
    Deprecated. 27/10/2020. Use transferTo(org.linphone.core.Address) instead.
    
    Performs a simple call transfer to the specified destination.
    
    The remote endpoint is expected to issue a new call to the specified
    destination. The current call remains active and thus can be later paused or
    terminated. It is possible to follow the progress of the transfer provided that
    transferee sends notification about it. In this case, the
    transfer_state_changed callback of the LinphoneCoreVTable is invoked to notify
    of the state of the new call at the other party. The notified states are
    #LinphoneCallOutgoingInit , #LinphoneCallOutgoingProgress,
    #LinphoneCallOutgoingRinging and #LinphoneCallConnected.
    
    Parameters:
    
    referTo - The destination the call is to be refered to.
    
    Returns:
    
    0 on success, -1 on failure
  - transferTo
```
int transferTo(@NonNull
               Address referTo)
```
    Performs a simple call transfer to the specified destination.
    
    The remote endpoint is expected to issue a new call to the specified
    destination. The current call remains active and thus can be later paused or
    terminated. It is possible to follow the progress of the transfer provided that
    transferee sends notification about it. In this case, the
    transfer_state_changed callback of the LinphoneCoreVTable is invoked to notify
    of the state of the new call at the other party. The notified states are
    #LinphoneCallOutgoingInit , #LinphoneCallOutgoingProgress,
    #LinphoneCallOutgoingRinging and #LinphoneCallConnected.
    
    Parameters:
    
    referTo - The Address the call is to be refered to.
    
    Returns:
    
    0 on success, -1 on failure
  - transferToAnother
```
int transferToAnother(@NonNull
                      Call dest)
```
    Transfers a call to destination of another running call.
    
    This is used for "attended transfer" scenarios. The transfered call is supposed
    to be in paused state, so that it is able to accept the transfer immediately.
    The destination call is a call previously established to introduce the
    transfered person. This method will send a transfer request to the transfered
    person. The phone of the transfered is then expected to automatically call to
    the destination of the transfer. The receiver of the transfer will then
    automatically close the call with us (the 'dest' call). It is possible to
    follow the progress of the transfer provided that transferee sends notification
    about it. In this case, the transfer_state_changed callback of the
    LinphoneCoreVTable is invoked to notify of the state of the new call at the
    other party. The notified states are #LinphoneCallOutgoingInit ,
    #LinphoneCallOutgoingProgress, #LinphoneCallOutgoingRinging and
    #LinphoneCallConnected.
    
    Parameters:
    
    dest - A running call whose remote person will receive the transfer
    
    Returns:
    
    0 on success, -1 on failure
  - update
```
int update(@Nullable
           CallParams params)
```
    Updates a running call according to supplied call parameters or parameters
    changed in the LinphoneCore.
    
    It triggers a SIP reINVITE in order to perform a new offer/answer of media
    capabilities. Changing the size of the transmitted video after calling
    linphone_core_set_preferred_video_size can be used by passing null as params
    argument. In case no changes are requested through the CallParams
    argument, then this argument can be omitted and set to null. WARNING: Updating
    a call in the #LinphoneCallPaused state will still result in a paused call even
    if the media directions set in the params are sendrecv. To resume a paused
    call, you need to call resume().
    
    Parameters:
    
    params - The new call parameters to use (may be null).
    
    Returns:
    
    0 if successful, -1 otherwise.
  - zoom
```
void zoom(float zoomFactor,
          float cx,
          float cy)
```
    Perform a zoom of the video displayed during a call.
    
    The zoom ensures that all the screen is fullfilled with the video.
    
    Parameters:
    
    zoomFactor - a floating point number describing the zoom factor. A value
    1.0 corresponds to no zoom applied.
    
    cx - a floating point number pointing the horizontal center of the zoom to
    be applied. This value should be between 0.0 and 1.0.
    
    cy - a floating point number pointing the vertical center of the zoom to
    be applied. This value should be between 0.0 and 1.0.
  - addListener
```
void addListener(CallListener listener)
```
  - removeListener
```
void removeListener(CallListener listener)
```
  - setUserData
```
void setUserData(java.lang.Object data)
```
    Sets the object to store in this object user's data
    
    Parameters:
    
    data - the object to store
  - getUserData
```
java.lang.Object getUserData()
```
    Gets the object stored in this object user's data
    
    Returns:
    
    the object store if any, null otherwise
  - getNativePointer
```
long getNativePointer()
```
    Gets the native pointer used by this class to make native method calls.
    
    Returns:
    
    the nativer pointer, as long
  - toString
```
java.lang.String toString()
```
    Overrides:
    
    toString in class java.lang.Object

Interface Call

Nested Class Summary

Method Summary

Method Detail

getAudioStats

getAuthenticationToken

getAuthenticationTokenVerified

setAuthenticationTokenVerified

getAverageQuality

getCallLog

isCameraEnabled

setCameraEnabled

getChatRoom

getConference

getCore

getCurrentParams

getCurrentQuality

getDir

getDiversionAddress

getDuration

isEchoCancellationEnabled

setEchoCancellationEnabled

isEchoLimiterEnabled

setEchoLimiterEnabled

getErrorInfo

getInputAudioDevice

setInputAudioDevice

isRecording

getMicrophoneMuted

setMicrophoneMuted

getMicrophoneVolumeGain

setMicrophoneVolumeGain

getNativeVideoWindowId

setNativeVideoWindowId

getOutputAudioDevice

setOutputAudioDevice

getParams

setParams

getPlayVolume

getPlayer

getReason

getRecordVolume

getReferTo

getRemoteAddress

getRemoteAddressAsString

getRemoteContact

getRemoteParams

getRemoteUserAgent

getReplacedCall

getRequestAddress

getSpeakerMuted

setSpeakerMuted

getSpeakerVolumeGain

setSpeakerVolumeGain

getState

getStreamCount

getTextStats

getToAddress

getTransferState

getTransferTargetCall

getTransfererCall

getVideoSource

setVideoSource

getVideoStats

accept

acceptEarlyMedia

acceptEarlyMediaWithParams

acceptUpdate

acceptWithParams

askedToAutoanswer

cancelDtmfs

confirmGoClear

createNativeVideoWindowId

decline

declineWithErrorInfo

deferUpdate

getStats

getToHeader

hasTransferPending

mediaInProgress